|PRODUCT CODE||AVAILABLE PACKAGING||CLEANING SOLUTIONS|
|PRODUCT CODE:120604||AVAILABLE PACKAGING:pail, drum||CLEANING SOLUTIONS:Rust||IMO:||ECO FRIENDLY:|
CONCENTRATED RUST STAIN REMOVER & METAL BRIGHTENER
- Quick removal of rust and rust stains from painted, steel, brass, copper, wooden and ceramic surfaces.
- Brightens non-ferrous metals.
- Cleans and passivates ferrous metal surfaces and inhibits further corrosion.
- Can be used by any conventional means.
- Acts as a rustproofing agent on metal surfaces.
- Safe to apply on all kinds of surfaces including aluminum.
- Highly concentrated; very economical and easy to use.
- Solvent-free, non-flammable.
- Comprises biodegradable surfactants.
RUST REMOVER PLUS is a very effective concentrated product designed to remove rust stain and to maintain anti- corrosive properties. It is a non-flammable liquid detergent, containing anticorrosion inhibitors, non-ionic biodegradable surfactants and a rust-dissolving acid.
Its composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V.
RUST REMOVER PLUS is used to remove stains from painted surfaces, glass, porce-lain, and terrazzo, ceramic tiles, marble and wood. It is suitable for removing rust stains from all types of ferrous metals and leaves metal surfaces passivated, so that they resist to atmospheric corrosion. RUST REMOVER PLUS can also act as a rust proofing agent on steel surfaces prior to any painting or coating application.
RUST REMOVER PLUS can also be used for the removal of white residues from epoxy-coatings that sometimes remains after carriage of Stearin, Olein, Palm fatty acid etc.
Before applying RUST REMOVER PLUS, ensure surface to be cleaned if free from scale, excess oil and dirt. Then apply RUST REMOVER PLUS as follows:
The dosage rate is 1 part of product per 1 part of water for severely corroded surfaces and pickling of welding repairs.
A solution of 20-50% should be used forless severely corroded or soiled surfaces and tarnish on copper and brass.After 15– 40 minutes, rinse off surface with water.
When used on aluminum surfaces or surfaces less rusted, dosage rate is 1 part of product per 2-5 parts of water.Rub as much as required, but leave product for no more than 5 minutes and then rinse with fresh water.
On painted surfaces, use 1 part of prod-uct per 2-5 parts of water and rinse off with water 15–20 min. after application.
On ceramic tiles, enamels, porcelain, glass etc., use 1 part of product per 1-4 parts of water, depending on the contamination.Rinse off with water after 20–40 minutes.
For light rust and scale in pipelines and tanks, recirculate a solution of 5–10% RUST REMOVER PLUS.For discoloration of stainless steel and epoxy coated tanks use the same method.
For white residues from epoxy-coatings that sometimes remains after carriage of Stearin, Olein, Palm fatty acid etc., recircu-late a solution of 5–10% RUST REMOVER PLUS. When injected, use a 5% solution. Recirculate or inject until residue is removed. Do not leave the product to dry on metal surfaces as it may leave a white deposit.
This product is used for the highlighted parts below
- White residues and stains that remain on tank coatings.
- Rust and light stains from painted, ceramic and wooden surfaces.
- Surface brightening.
ordering this product?