CATEGORY
HOLD CLEANING
Cement Remover SuperChemo Marine Chemicals-

Cement Remover Super

CARGO HOLD CLEANER
PRODUCT CODE AVAILABLE PACKAGING CLEANING SOLUTIONS
110305 pail, drum Cement, Dry cement stains, Cement clinkers    

POWERFUL CLEANER AFTER CEMENT & CEMENT CLINKERS

  • Heavy duty acid-based product.
  • Effectively removes cement/cement clinkers cargo deposits, dry cement stains and lime.
  • Helps with removing possible existing rust.
  • Quick and intrinsic action.
  • Contains powerful inhibitors for surface protection.
  • Safe to use on rubber/plastic.
  • Water-soluble, non-flammable.
  • Free from hydrocarbon or chlorinated solvents.
  • Cost effective, easy to apply and use.
  • Composition conforming to MARPOL Annex V.

Certificates

IMO & MARPOL

Description

CEMENT REMOVER SUPER is designed to instantly penetrate and disperse cement, providing complete cleaning of cement cargo deposits, dry cement stains and lime deposits. The product is capable of cleaning hard cement deposits perfectly while removing the possible existing rust. CEMENT REMOVER SUPER is water-based and non-flammable containing powerful acids, inhibitors for surface protection and efficient detergents.

Its composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V.

Application

CEMENT REMOVER SUPER is recommended for removing cement deposits on cargo holds, as well as cleaning any cement stain on metal surfaces and articles. 

Please refer to “CHEMO CARGO HOLD CLEANING SOLUTIONS” brochure, which summarizes the solutions that CHEMO offers for tackling a variety of contamination and deposit problems.

Use and dosing

Instructions are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel.

Always add acids to water, never the reverse. Since CEMENT REMOVER SUPER
is considered a corrosive product, operators must always consult the safety
instructions on the product’s material safety data sheet before use.

Instructions are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to
interfere with the judgment of the vessel’s responsible personnel.

Always add acids to water, never the reverse. Since CEMENT REMOVER SUPER
is considered a corrosive product, operators must always consult the safety
instructions on the product’s material safety data sheet before use.

Always try to preclean tanks with high-pressure water, so as to remove large deposits and ensure an effective cleaning operation. Be sure that the surface has dried, before applying the chemicals, in order to avoid unnecessary dilution.

The product may be used undiluted or diluted, depending on the case. On heavy deposit built-up, use CEMENT REMOVER SUPER undiluted. For light depositions on large surfaces, use CEMENT REMOVER SUPER as a solution of 10-40% in water.

When the residues are met in difficult-to-clean places, such as corner cavities, tank skeleton inlets, etc., apply CEMENT REMOVER SUPER using conventional means such as brushes, mops, sponges or any other manual device, while cleaning in rapidly and irregularly. Allow 15 minutes for the product to act and then wash thoroughly with high-pressure water. If contamination persists, repeat the cleaning procedure, until the required result is obtained.

This product is used for the highlighted parts below

Problems solved
  • CEMENT/ CEMENT CLINKERS CARGO DEPOSITS.
  • DRY CEMENT STAINS.
  • LIME DEPOSITS.
Are you interested in
ordering this product?